Parts
Page
Grab Irons
Brass Wire Grab Irons
Grab Irons are brass 1/32" (.032") wire. Grabs are shaped on a
custom built bending brake.
Bag of 36 Grab
Irons.........................................................................................$12.00
Specifications:
Wire size
1/32" / .032"
Width between legs
7/8" / .875" (18 scale inches in 1:20.3)
Length of legs
5/32" / .156" (3 scale inches in 1:20.3)
Inside diameter of eye
.060"
Outside diameter of eye
.124"
Center hole distance between eye's
.750" to
.900" *
* Eye's are adjustable by bending outward
Brass Square Nut Pins
Brass Nut/Bolt Pins
Need Strength ?
These will do it !
Bag of 100 Brass N/B's...........................................$15.00
Rivet
Strips
Brass Rivet
Strips..........................................................................................................$2.00
per strip
Specifications
Size, 1' long by 3/16" wide
Rivet spacing, .100" or 10 per inch
Rivet size, approximately .050" in diameter and .025" in height
Coupler
Lift bar
Lift Bars are made from 1/16" brass rod bent in a custom brake.
Coupler end is flattened with a hole for attaching chain (not included). Two white
metal castings facilitate mounting to car ends.
1 set Lift Bars (1 "A" end and 1 "B"
end)........................................................................................$3.00
Brass Strap Steps
Strap Steps are manufactured from 1/32" by 3/32" brass bar. They
are bent, twisted and punched on a custom built brake and hole punch. Holes are 1/16"
diameter and clean punched and not drilled. Included with each set of 4 steps is 16
brass NB's for mounting.
Dimensions
Legs are 5/8" (.625") apart
Legs are 7/8" (.875") long.
Strap Step Set with 16
NB's................................................................................................................$8.00
Longer Leg version of above (1/4" longer each leg) (Drop Bottom
Gon?)................................$8.50
Brake Hose Assembly
PNG Brake Hose assembly
(2 pair pictured)
White Metal casting with 1/16" brass wire cast into the angle cock
for easy installation. Price is for 1 pair.
PNG Brake Hose Assembly, per pair price (enough for 1
car)....................................................$4.00
Laser cut plywood and white metal casting glue together to create a pair
of 4000 series coupler box extensions. These will glue on top of Accucraft couplers after
the "fins" have been removed.
PNG Coupler
Box............................................................................................................................$4.00
Loco Detail Parts
1:20.3 parts cast in white metal. Parts have been painted and weathered
for effect. Parts bag will include 1 large and 1 small shovel. 1 water bag and 1 oil can.
Loco Detail
Parts..............................................................................................................................$12.00
Tender Detail Parts
1:20.3 parts cast in white metal. Parts have been painted and weathered
for effect. Parts bag will include a right & left butterfly re-railer, 2 wedges and a
rail section.
Tender Detail
Parts......................................................................................................................$12.00
Passenger Car Step
1:20.3 part cast in white metal. Part have been painted and weathered for
effect. Parts bag will include a 5 pieces to glue together to form the step.
Passenger Car
Step.......................................................................................................................2
each for $6.00
Couplers
Available with
Kadee # 835
Accucraft 1:20.3
$5.00 with the purchase of a kit. $8.00 without a kit.
Trucks
Aristo/Delton Classic Truck e/w Sierra Valley Steel Wheels
$35.00 with or without the purchase of a kit
Accucraft Die-cast steel and brass 3' 7" D&RGW Trucks
$45.00 with purchase of a kit. $70 without a kit.
$65 Ball Bearing Truck with purchase of a kit. $85 without a kit.
Don Winter 4' 8" Andrews Strap Style White Metal Trucks
$35 with the purchase of a kit only
Accucraft die-cast Jackson & Sharp Passenger Trucks
e/w PNG ball bearing
$110.00 open to all purchasers
